New Modulbox Compact
We announce the birth of the new line of enclosures MODULBOX COMPACT XTS.
This new line is composed of 24 kits of enclosures divided into three versions called A, B and C.
The enclosures can be hooked on the GUIDE EN 60715 (made in conformity with standard DIN 43880) or it can be fixed to the wall.
These kits are therefore very similar to our other MODULBOX lines, but the height is reduced to about 32 mm. The result is an extremely compact enclosure that can be equipped with the same electronic boards arranged on the base in the MODULBOX XTS series, and it can be fitted with a second board closer to the top of the enclosure thanks to simple spacers or pins.
Versions A or B follow the same logic as the MODULBOX XTS enclosures and therefore allow the use of terminal covers (and of terminals for printed circuit) on one side of the enclosure, on two sides or on none.
As the enclosure is very thin it is possible to carry out CNC mechanical processing directly and it can be completed with graphics (digital printing) in absolute simplicity and with extremely economic solutions.
It is available at present in high-performance UL94V0 plastic in grey, but at a small extra charge we can supply any colour from the RAL or Pantone ranges to suit your requests. In future this new line may also be integrated with a completely transparent plastic version, to have a better management of the front panel; for very small quantities, a new painting service will also be offered.
THE MAIN CHARACTERISTICS OF THE NEW LINE MODULBOX XTS COMPACT ARE:
1. Low cost
2. General high quality, particularly of the plastic material
3. Simple and economic execution of mechanical finishes and/or graphics
4. Versatility for special colours
5. Versatility of moulds for special executions
DOCUMENTATION IMMEDIATELY AVAILABLE:
> STOCK AVAILABILITY SCHEDULE, AS LISTED BELOW:
AVAILABILITY VERSIONS A/B/C:
MODEL | SAMPLE | STOCK |
---|---|---|
6M | End September 2014 | November 2014 |
9M/12M | End November 2014 | January 2015 |
4M/5M/8M | End January 2015 | February 2015 |
2M/3M | End January 2015 | March 2015 |
AS FROM JANUARY 2015 THE FOLLOWING WILL ALSO BE AVAILABLE:
• Catalogue of CNC processing and graphic finishing, digital printing
• Price list for CNC processing and digital printing
To view the product on the site click here